![background image](http://html.mh-extra.com/html/bobrick/b-922/b-922_technical-data_2781828001.webp)
continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
Revised 12/22/16 Series D
Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.
© 2016 by Bobrick Washroom Equipment, Inc.
Technical Data
7-7/8''
200mm
Centerline of coupling tee
should be within 6" (150mm)
of soap dispenser centerline.
11-13/16''
300mm
Clear Elbow
Soap Dispenser
Coupling Tee
Pipe Connections
not furnished
End-Caps available from Bobrick
as optional accessory; order
Part No. 922-45 for 3" standard pipe size.
Black Flexible Hose
Soap
Dispenser
Shank
Supply
Tube
Underside of
Lavatory or
Countertop
Small Opening
on top of the
Clear Elbow
Plug and O-Ring
in Drain Hole
Finish Face of Wall
6" Min. to
20" Max.
150 to 510mm
4-11/16"
120mm
Black
Flexible
Hose
Piston, Spout &
Cover Assembly
Retaining Nut
Supply Tube
Lavatory or
Countertop
Escutcheon
Hole
Rubber Washer
Spring Washer
1±1/16" (25±1.6mm)
Dia. Mounting Hole
Shank
The B-922 Series Under-The-Counter Reservoir contains a large volume of soap.
Impact by washroom maintenance equipment, or acts of vandalism may cause soap
to leak onto the floor creating a safety hazard.
To reduce the possibility of this hazard, the following steps are recommended.
1)
Install B-922 Series Mounting/Coupling Tees as high as possible under
lavatory or countertop.
2)
Reduce the length of each Clear Elbow (Installation Step No. 6) to minimize
B-922 Series projection from the wall.
3)
Keep washroom maintenance away from Under-The-Counter Soap Reservoir.
4)
Do not install the B-922 Series in washrooms subject to vandalism.
Model Number
B-922
B-9226
Spout Length
4''
6''
(100mm) (150mm)
Spout Height
3'' 3-7/8''
(75mm) (100mm)
Specify Model Required:
Designer's Note: Bobrick liquid soap
dispensers are designed to dispense
commercially marketed all purpose
hand soaps including liquid and lotion
soaps and synthetic detergents.
Bobrick soap dispensers are NOT
designed to dispense alcohol-based
hand sanitizers or iodine-based
surgical soaps.
B-922
B-922
6
LAVATORY-MOUNTED
SOAP DISPENSER
WITH UNDER-THE-COUNTER
SOAP RESERVOIR
Allow horizontal clearance
along mounting surface
below countertop
5-1/2" high x 5-1/4" deep
(140 x 130mm)
to accomodate coupling tees
and pipe connections.