background image

TOUCH SCREEN MANUAL TIMER (TSMT)

OPERATING INSTRUCTIONS

This remote control transmitter provides a multifunctional, reliable and user-friendly remote control for the fireplace system.  The 
transmitter can manually turn the system on and off.  Always check the appliance home owner’s manual for additional informa-
tion, or warnings regarding accessory installation before using  this remote control system.

Carefully inspect the contents for shipping damage. If any parts are missing or damaged, immediately contact the dealer from 
whom you purchased the kit or Ambient Technologies Technical Support  at 1 800 398 6195.  Do not attempt to install any part of 
the kit unless all parts are in good condition.  Please keep this booklet for future reference.

 

Description 

Qty

  Transmitter 

1

    Mounting Base 

1

    Battery Alkaline AAA 

4

    #6

C\v

” Screws, Zinc 

2

  Receiver (Assembly) consists of: 

1

    Receiver Box
    Slide Button-Black (On/RS/Off)
    Battery Alkaline AA (for receiver) 

4

  Wall Cover Plate - Black 

1

  Wall Cover Plate - White 

1

  Slide Button - White (On/RS/Off) 

1

  Battery Door - White 

1

  Plug-in Wiring Assembly - 22”  

1

  Velcro (Loop and Hook) 

1

  Installation Instructions 

1

  #6 3/4” Screws, Zinc (for Wall Cover Plate) 

2

  #8 Screws (for fireplace system control covers) 

2

FEATURES

  Large LCD display

  Touch Screen Panel

  Timer Mode

  Sleep Mode to Save Battery

  Low battery Indication on Transmitter

  Child Proof Lock-out

  LCD Backlight

  On-screen Security Codes Setup on Transmitter

  16 Security Codes (DIP Switches) on Receiver

  Optional 6 Hour Shut Down on Receiver 

  Quick Disconnect Wiring Assembly

CONTENTS OF KIT

20300538  10/09  Rev. 0

f i r e - p a r t s . c o m

Summary of Contents for TSMT









Reviews: