manualshive.com logo in svg

ZyXEL Communications ZyXEL ZyWALL 5, User Manual

Share
Download
ZyXEL Communications ZyXEL ZyWALL 5 User Manual Download Page 269

ZyWALL 5 User’s Guide

Chapter 15 Certificates

267

15.12  Trusted Remote Hosts

Click 

CERTIFICATES

, 

Trusted Remote Hosts

 to open the 

Trusted Remote Hosts

 screen 

(see the following figure). This screen displays a list of the certificates of peers that you trust 
but which are not signed by one of the certification authorities on the 

Trusted CAs

 screen.

You do not need to add any certificate that is signed by one of the certification authorities on 
the 

Trusted CAs

 screen since the ZyWALL automatically accepts any valid certificate signed 

by a trusted certification authority as being trustworthy.

CRL Distribution 

Points

This field displays how many directory servers with Lists of revoked certificates 

the issuing certification authority of this certificate makes available. This field 

also displays the domain names or IP addresses of the servers.

MD5 Fingerprint

This is the certificate’s message digest that the ZyWALL calculated using the 

MD5 algorithm. You can use this value to verify with the certification authority 

(over the phone for example) that this is actually their certificate.

 

SHA1 Fingerprint

This is the certificate’s message digest that the ZyWALL calculated using the 

SHA1 algorithm. You can use this value to verify with the certification authority 

(over the phone for example) that this is actually their certificate.

Certificate in PEM 

(Base-64) Encoded 

Format

This read-only text box displays the certificate or certification request in Privacy 

Enhanced Mail (PEM) format. PEM uses 64 ASCII characters to convert the 

binary certificate into a printable form. 
You can copy and paste the certificate into an e-mail to send to friends or 

colleagues or you can copy and paste the certificate into a text editor and save 

the file on a management computer for later distribution (via floppy disk for 

example).

Export

Click this button and then 

Save

 in the 

File Download

 screen. The 

Save As

 

screen opens, browse to the location that you want to use and click 

Save

.

Apply

Click 

Apply

 to save your changes back to the ZyWALL. You can only change 

the name and/or set whether or not you want the ZyWALL to check the CRL that 

the certification authority issues before trusting a certificate issued by the 

certification authority.

Cancel

Click 

Cancel

 to quit and return to the 

Trusted CAs 

screen.

Table 83   

Trusted CA Details (continued)

LABEL

DESCRIPTION

Summary of Contents for ZyXEL ZyWALL 5





























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands