manualshive.com logo in svg

ZyXEL Communications ZyXEL ZyWALL 5, User Manual, Page: 181 / 668

Share
Download
ZyXEL Communications ZyXEL ZyWALL 5 User Manual Download Page 181

ZyWALL 5 User’s Guide

Chapter 10 Firewall Screens

179

FINGER(TCP:79) 

Finger is a UNIX or Internet related command that can be used to find 

out if a user is logged on.

FTP(TCP:20.21) 

File Transfer Program, a program to enable fast transfer of files, 

including large files that may not be possible by e-mail.

H.323(TCP:1720)

NetMeeting uses this protocol.

HTTP(TCP:80) 

Hyper Text Transfer Protocol – a client/server protocol for the world 

wide web.

HTTPS(TCP:443)

HTTPS is a secured http session often used in e-commerce.

ICQ(UDP:4000)

This is a popular Internet chat program.

IKE(UDP:500)

The Internet Key Exchange algorithm is used for key distribution and 

management.

IP(AX.25:0)

AX.25 (Amateur X.25, an “Amateur” version of X.25) is the 

communications protocol used for packet radio.

IP(IPv6:0)

IPv6 (Internet Protocol version 6) is a protocol designed by the IETF 

to replace and solve many problems of the version 4 (IPv4).

 

IPSEC_ TRANSPORT /

TUNNEL(AH:0)

The IPSEC AH (Authentication Header) tunneling protocol uses this 

service.

IPSEC_TUNNEL(ESP:0)

The IPSEC ESP (Encapsulation Security Protocol) tunneling protocol 

uses this service.

IRC(TCP/UDP:6667)

This is another popular Internet chat program.

MSN Messenger (TCP:1863)

Microsoft Networks’ messenger service uses this protocol. 

MULTICAST(IGMP:0)

Internet Group Multicast Protocol is used when sending packets to a 

specific group of hosts.

NetBIOS(TCP/UDP:137~139, 

45)

NetBIOS (Network Basic Input/Output System) are TCP or UDP 

packets that enable a computer to connect to and communicate with 

a LAN.

NEWS(TCP:144) 

A protocol for news groups.

NFS(UDP:2049) 

Network File System – NFS is a client/server distributed file service 

that provides transparent file sharing for network environments.

NNTP(TCP:119) 

Network News Transport Protocol is the delivery mechanism for the 

USENET newsgroup service.

PING(ICMP:0)

Packet Internet Groper is a protocol that sends out ICMP echo 

requests to test whether or not a remote host is reachable.

POP3(TCP:110)

Post Office Protocol version 3 lets a client computer get e-mail from a 

POP3 server through a temporary connection (TCP/IP or other).

PPTP(TCP:1723)

Point-to-Point Tunneling Protocol enables secure transfer of data 

over public networks. This is the control channel.

PPTP_TUNNEL(GRE:0)

Point-to-Point Tunneling Protocol enables secure transfer of data 

over public networks. This is the data channel.

RCMD(TCP:512) 

Remote Command Service.

REAL_AUDIO(TCP:7070) 

A streaming audio service that enables real time sound over the web.

REXEC(TCP:514) 

Remote Execution Daemon.

RLOGIN(TCP:513) 

Remote Login.

ROADRUNNER(TCP/

UDP:1026)

This is Time Warner’s cable modem session management protocol. It 

handles authentication and dynamic addressing.

Table 53   

Predefined Services (continued)

SERVICE

DESCRIPTION

Summary of Contents for ZyXEL ZyWALL 5





























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments