manualshive.com logo in svg

ZyXEL Communications ZyXEL ZyWALL 5, User Manual

Share
Download
ZyXEL Communications ZyXEL ZyWALL 5 User Manual Download Page 167

ZyWALL 5 User’s Guide

Chapter 10 Firewall Screens

165

10.3.2  Security Ramifications

Once the logic of the rule has been defined, it is critical to consider the security ramifications 
created by the rule:

1

Does this rule stop LAN users from accessing critical resources on the Internet? For 
example, if IRC is blocked, are there users that require this service?

2

Is it possible to modify the rule to be more specific? For example, if IRC is blocked for all 
users, will a rule that blocks just certain users be more effective?

3

Does a rule that allows Internet users access to resources on the LAN create a security 
vulnerability? For example, if FTP ports (TCP 20, 21) are allowed from the Internet to the 
LAN, Internet users may be able to connect to computers with running FTP servers.

4

Does this rule conflict with any existing rules?

Once these questions have been answered, adding rules is simply a matter of plugging the 
information into the correct fields in the web configurator screens.

10.3.3  Key Fields For Configuring Rules

10.3.3.1  Action

Should the action be to 

Block

 or 

Forward

?

Note: 

“Block” means the firewall silently discards the packet.

10.3.3.2  Service

Select the service from the 

Service

 scrolling list box. If the service is not listed, it is necessary 

to first define it. See 

Section 10.8 on page 178

 for more information on predefined services.

10.3.3.3  Source Address

What is the connection’s source address; is it on the LAN, DMZ or WAN? Is it a single IP, a 
range of IPs or a subnet?

10.3.3.4  Destination Address

What is the connection’s destination address; is it on the LAN, DMZ or WAN? Is it a single 
IP, a range of IPs or a subnet?

10.4  Connection Direction Examples

This section describes examples for firewall rules for connections going from LAN to WAN 
and from WAN to LAN. Rules for the DMZ work in a similar fashion.

Summary of Contents for ZyXEL ZyWALL 5





























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands