ZyXEL Communications ZyXEL Vantage VSG-1000, User Manual

Page: 105 / 131

VSG-1000 Vantage Service Gateway
Troubleshooting 15-5
Figure 15-5 SMT: Debug Mode: Verifying VSG and TFTP Settings
7. The VSG downloads the firmware. After the file transfer is complete, the VSG restarts automatically.
Figure 15-6 SMT: Debug Mode: Firmware Upload Complete
8.
After the VSG finishes restarting, you should see the “
Press any key to continue
” prompt,
press any key to display the SMT login screen. Enter “admin” as the username and “1234” as the password
to access the VSG.
----------- TFTP download parameters -----------
IP address :10.59.1.1
TFTP server IP address :10.59.1.33
Gateway IP address :10.59.1.33
Subnet mask :255.0.0.0
File name :VSG1000-10303.bin
------------------------------------------------
Do you want to change above entries(Y/N)?n
Do you want to change above entries(Y/N)?n
Attached TCP/IP interface to rtl1.
Attaching network interface lo0... done.
Downloading...
100%
Erasing FLASH...OK
Writing to FLASH...OK
Restarting...