Prestige 100MH PSTN Router/Hub
2-15
Chapter 2
Hardware Installation & Initial Setup
2.9.2 Advanced WAN Port Setup
The Advanced Modem Setup Menu allows you to configure the AT Commands for the
internal modem and the call control parameters.
Step 1.
In Menu 2.1, move the cursor to the Advanced Setup field and press the space bar
to select
[Yes]
, then press
[Enter]
.
Step 2.
When Menu 2.1.1 appears, fill in the appropriate AT commands and call control
parameters for the internal modem, as shown in Figure 2-8.
Figure 2-8.
Menu 2.1.1 - Advanced Modem Setup
Menu 2.1.1 - Advanced Modem Setup
AT Command Strings:
Init= at&fs0=0w2s95=1
Dial= atdt
Call Control
Dial Timeout(sec)= 60
Retry Counter= 0
Retry Interval(sec)=
N/A
Call Back Delay(sec)=
15
Enter here to CONFIRM or ESC to CANCEL: