ZyXEL Communications ZyWALL 70 User Manual Download Page 256

Page: 256 / 705

ZyWALL 70 User’s Guide

256

Chapter 14 VPN Screens

Figure 114

VPN Rules (IKE): Network Policy Move

The following table describes the labels in this screen.

14.13 Manual VPN Rule Summary Screen

Refer to

Figure 110 on page 244

for a graphical representation of the fields in the web

configurator.

Click

VPN

and the

VPN Rules (Manual)

tab to open the

VPN Rules

screen. This is a read-

only menu of your IPSec rules (tunnels). Edit an IPSec rule by clicking the edit icon to
configure the associated submenus.

Table 76

VPN Rules (IKE): Network Policy Move

LABEL

DESCRIPTION

Network Policy

Information

The following fields display the general network settings of this VPN policy.

Name

This field displays the policy name.

Local Network

This field displays one or a range of IP address(es) of the computer(s) behind the

ZyWALL.

Remote Network

This field displays one or a range of IP address(es) of the remote network behind

the remote IPsec router.

Gateway Policy

Information

Gateway Policy

Select the name of a VPN rule (or gateway policy) to which you want to associate

this VPN network policy.
If you do not want to associate a network policy to any gateway policy, select

Recycle Bin

from the drop-down list box. The

Recycle Bin

gateway policy is a

virtual placeholder for any network policy(ies) without an associated gateway

policy. When there is a network policy in

Recycle Bin

, the

Recycle Bin

gateway

policy automatically displays in the

VPN Rules (IKE)

screen.

Apply

Click

Apply

to save the changes.

Cancel Click

Cancel

to discard all changes and return to the main VPN screen.

Summary of Contents for ZyWALL 70


































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL 70

Reviews:

Related manuals for ZyWALL 70

Brands by name

Popular brands

ZyXEL Communications ZyWALL 70, User Manual

Search results

Summary of Contents for ZyWALL 70

Reviews:

Related manuals for ZyWALL 70

Brands by name

Popular brands