ZyXEL Communications ZyWALL 70 User Manual Download Page 138

Page: 138 / 705

ZyWALL 70 User’s Guide

138

Chapter 7 WAN Screens

7.7 Configuring Load Balancing

To configure load balancing on the ZyWALL, click

WAN

in the navigation panel. The

WAN

General

screen displays by default. Select

Active/Active Mode

under

Operation Mode

enable load balancing on the ZyWALL.

The

WAN General

screen varies depending on what you select in the

Load Balancing

Algorithm

field.

7.7.1 Least Load First

To configure Least Load First, select

Least Load First

in the

Load Balancing Algorithm

field.

Check WAN1/2

Connectivity

Select the check box to have the ZyWALL periodically test the respective WAN

port's connection.
Select

Ping Default Gateway

to have the ZyWALL ping the WAN port's default

gateway IP address.
Select

Ping this Address

and enter a domain name or IP address of a reliable

nearby computer (for example, your ISP's DNS server address) to have the

ZyWALL ping that address. For a domain name, use up to 63 alphanumeric

characters (hyphens, periods and the underscore are also allowed) without spaces.

Check Traffic

Redirection

Connectivity

Select the check box to have the ZyWALL periodically test the traffic redirect

connection.
Select

Ping Default Gateway

to have the ZyWALL ping the backup gateway's IP

address.
Select

Ping this Address

and enter a domain name or IP address of a reliable

nearby computer (for example, your ISP's DNS server address) to have the

ZyWALL ping that address. For a domain name, use up to 63 alphanumeric

characters (hyphens, periods and the underscore are also allowed) without spaces.

Windows

Networking

(NetBIOS over

TCP/IP):

NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that

enable a computer to connect to and communicate with a LAN. For some dial-up

services such as PPPoE or PPTP, NetBIOS packets cause unwanted calls.

Allow between

WAN and LAN

Select this check box to forward NetBIOS packets from the LAN to the WAN and

from the WAN to the LAN. If your firewall is enabled with the default policy set to

block WAN to LAN traffic, you also need to enable the default WAN to LAN firewall

rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to the WAN

and from the WAN to the LAN.

Allow between

WAN and DMZ

Select this check box to forward NetBIOS packets from the WAN to the DMZ and

from the DMZ to the WAN.
Clear this check box to block all NetBIOS packets going from the WAN to the DMZ

and from the DMZ to the WAN.

Allow Trigger Dial Select this option to allow NetBIOS packets to initiate calls.

Apply

Click

Apply

to save your changes back to the ZyWALL.

Reset

Click

Reset

to begin configuring this screen afresh.

Table 36

WAN General (continued)

LABEL

DESCRIPTION

Summary of Contents for ZyWALL 70


































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ZyWALL 70

Reviews:

Related manuals for ZyWALL 70

Brands by name

Popular brands

ZyXEL Communications ZyWALL 70, User Manual

Search results

Summary of Contents for ZyWALL 70

Reviews:

Related manuals for ZyWALL 70

Brands by name

Popular brands