Chapter 13 Spanning Tree Protocol
XS1930 Series User’s Guide
149
Figure 108
Advanced Application > Spanning Tree Protocol > Status: MSTP
The following table describes the labels in this screen.
Table 67 Advanced Application > Spanning Tree Protocol > Status: MSTP
LABEL
DESCRIPTION
Configuration
Click
Configuration
to specify which STP mode you want to activate.
RSTP
Click
RSTP
to edit RSTP settings on the Switch.
MSTP
Click
MSTP
to edit MSTP settings on the Switch.
CST
This section describes the Common Spanning Tree settings.
Bridge
Root
refers to the base of the spanning tree (the root bridge).
Our Bridge
is this switch. This
Switch may also be the root bridge.
Bridge ID
This is the unique identifier for this bridge, consisting of bridge priority plus MAC address. This ID
is the same for
Root
and
Our Bridge
if the Switch is the root switch.
Hello Time
(second)
This is the time interval (in seconds) at which the root switch transmits a configuration
message. The root bridge determines Hello Time, Max Age and Forwarding Delay.
Max Age (second)
This is the maximum time (in seconds) the Switch can wait without receiving a configuration
message before attempting to reconfigure.
Forwarding Delay
(second)
This is the time (in seconds) the root switch will wait before changing states (that is, listening to
learning to forwarding).
Cost to Bridge
This is the path cost from the root port on this Switch to the root switch.
Port ID
This is the priority and number of the port on the Switch through which this Switch must
communicate with the root of the Spanning Tree.
