ZyXEL Communications WX3310-B0 Page 88 User Manual Download

Page: 88 / 118

Chapter 14 Troubleshooting

WX3310-B0 User’s Guide

14.2 WX3310 Access and Login

I forgot the password.

The default password is in the device label.

If this does not work, you have to reset the device to its factory defaults. See

Section 14.4 on page 90

I cannot see or access the

Login

screen in the Web Configurator.

Make sure you are using the correct address.

• The default web address (URL) of the WX3310 is

http://zyxelsetup

(for Windows) or

http://

zyxelsetup.local

(for Mac).

Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
Start Guide and

Section 1.4 on page 11

Make sure your Internet browser does not block pop-up windows and has JavaScript and Java
enabled.

Reset the device to its factory defaults, and try to access the WX3310 with the default address.

If the problem continues, contact the network administrator or vendor, or try one of the advanced
suggestions.

Advanced Suggestions

• If your computer is connected wirelessly, use a computer that is connected to a

LAN

port.

I can see the

Login

screen, but I cannot log in to the WX3310.

Make sure you have entered the password correctly. The default password is in the device label.

This can happen when you fail to log out properly from your last session. Try logging in again after 5
minutes.

Disconnect and re-connect the WX3310.

If this does not work, you have to reset the device to its factory defaults. See

Section 14.4 on page 90

Summary of Contents for WX3310-B0























































































































Search results

Summary of Contents for WX3310-B0

Reviews:

Related manuals for WX3310-B0

Brands by name

Popular brands

ZyXEL Communications WX3310-B0, User Manual

Search results

Summary of Contents for WX3310-B0

Reviews:

Related manuals for WX3310-B0

Brands by name

Popular brands