Chapter 9 Wireless LAN
WRE6505 User’s Guide
58
hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC address of
the devices to configure this screen.
To change your WRE6505’s MAC Address List settings, click
Network
>
Wireless LAN (2.4G/5G)
>
MAC Filter
. The screen appears as shown.
Figure 47
Network > Wireless LAN (2.4G/5G) > MAC Filter
The following table describes the labels in this menu.
Table 24
Network > Wireless LAN (2.4G/5G)> MAC Address List
LABEL
DESCRIPTION
Active
Select this to enable MAC address filtering.
SSID for MAC
Filter
Select the SSID for which you want to configure MAC filtering.
MAC Address
Filter
Select
Enable
to allow MAC address filtering (default: Disable).
Filter Action
Select
Disable
to deactivate the MAC filtering rule.
Select
Allow
to permit access to the WRE6505, MAC addresses not listed will be denied
access to the WRE6505.
Set
This is the index number of the MAC address.
MAC Address
Enter the MAC addresses of the wireless station to include in the rule. Enter the MAC
addresses in a valid MAC address format, that is, six hexadecimal character pairs, for
example, 12:34:56:78:9a:bc.
Apply
Click
Apply
to save your changes back to the WRE6505.
Cancel
Click
Cancel
to return to the previous menu without saving.