Chapter 6 Connection Wizard
WRE6505 User’s Guide
32
Note: The wireless stations and WRE6505 must use the same SSID, channel ID, WPA-PSK
(if WPA-PSK is enabled) or WPA2-PSK (if WPA2-PSK is enabled) for wireless
communication.
2
Click
Next
to continue.
3
Type the selected network’s wireless password (key). The number of characters accepted by the
KEY field is shown in the following table.
Figure 19
Wizard Step 3: Enter Wireless Network Password
The following table describes the labels in this screen.
4
Click
Next
to continue and verify the password.
6.2.2.2 Completing the Connection Wizard
Complete the installation process by reviewing the wireless network settings and applying the
configuration.
Next
Click this to start the next step in the AP setup process.
Exit
Click this to exit the wizard.
Previous
Click this to see the previous page of APs.
Next
Click this to see the next page of APs.
Table 12
Network > Wireless LAN > AP Select (continued)
LABEL
DESCRIPTION
Table 13
Maximum Key Lengths
ENCRYPTION
KEY FORMAT
KEY LENGTH
64-bit WEP
ASCII
5 characters
Hex
10 characters
128-bit WEP
ASCII
13 characters
Hex
26 characters
WPA pre-shared key
Passphrase
8-63 characters
Hex
64 characters
