U-90E
Data/Fax
Modem
AT Command Set Summary
5-15
Command Options Function & Description
Ref.
*M0 *
Leased line auto-handshake on originate
mode.
*M1
Leased line auto-handshake on answer
mode.
*Pn n=0-31
*P11 *
Set leased line transmission power level;
ranges from 0 dBm to –31dBm (default: -
11 dBm depends on the country code)
(see also S35.3)
S17.1-4
*Qn
Action taken when line quality changes. S27.6-7
*Q0
No action to poor signal quality.
*Q1
Retrain action taken if signal quality is
poor. (See also S41.2)
*Q2 *
Adaptive rate, automatic fall-back or
forward.
*Q3
Disconnect if signal quality is poor.
*T
Recall the last CND (Caller ID)
information.
S40.2
*V
View password table.
Note:
•
*V command requires the supervisor password before execution.
*Wab
Writes the local configuration profile a to
remote user profile b and resets the
remote modem from that profile:
a= 0-3, local user profile number
4, local active configuration
5, local factory default settings
b= 0-3 remote user profile number.
S36.1
Note:
•
The above command only works when the modem is on-line independent of
the type of connection involved.
*$
Extended *AT Command summary help.
