ZyXEL Communications U-90E, User Manual

Page: 70 / 152

U-90E Data/Fax Modem
Status Registers
6-4
Command bit dec hex Function and description Ref.
power on
64 40 Profile 2 as active settings after
power on Z2
96 60 Profile 3 as active settings after
power on Z3
128 80 * Factory default as active settings
after power on Z4
S16= dec Hex Test status register +000
0 0 No test in progress &T0
1 1 Analog Loop-back test in progress &T1
3 3 Local Digital Loop-back test in
process &T3
6 6 Remote Digital Loop-back test in
process &T6
7 7 Remote Digital Loop-back with self-
test in process &T7
8 8 Analog Loop-back with self test in
progress &T8
S17= bit dec Hex Bit-mapped register +022
0 0 0* Disable secondary channel *S0
1 1 Enable secondary channel *S1
4-1 0-30 0-1E Set leased line transmission power
level from 0 to -15 dBm. (See also
S35b3) (Default *P11)
*Pn
5 0 0* Normal dial D
32 20 Reverse dial, go on-line in answer
mode. DR
7,6 0 0* AT Commands set *I0
64 40 V.25bis command set *I1
128 80 Dumb mode (no command accepted) *I2