ZyXEL Communications U-90E, User Manual

Page: 74 / 152

U-90E Data/Fax Modem
Status Registers
6-8
Command bit dec hex Function and description Ref.
32 20 ATX4 X4
40 28* ATX5, error control result code is
enabled (Default) X5
48 30 ATX6, error control result code is
enabled X6
56 38 ATX7, error control result code is
enabled X7
6 0 0 Display result code in numeric format
(see S35.7) V0
64 40* Display result code in verbose format V1
7 0 0* Modem returns result code Q0
128 80 Modem does not return result code
(see also S40.1) Q1
S24= bit dec Hex Bit mapped register +067
6-4 16-
112 10-70 Speaker volume control, increments
of 32 in decimal value
L0-7
S25= 0-255 0-FF Specify the time delay that DTR
signal needs to be OFF before it will
be recognized, in 10 ms units. If
S25=0, the delay time is set to 4 ms
+000
S26= dec hex RTS/CTS delay +000
0-255 0-FF Set the delay, in 10 millisecond units
between the RTS and modem’s CTS
response in synchronous mode (see
‘&Rn’ command)
&Rn
S27= bit dec hex Bit mapped register +156
0-2 Modem error control
0 0 No error control &K0
1 1 MNP4 + MNP3 (see also S41.0) &K1
2 2 MNP4 + MNP5 (see also S38.5,
S41.0) &K2
3 3 V.42+MNP4 &K3