U-90E
Data/Fax
Modem
Special Functions
10-7
RING
TIME: 04-28 12:30
REASON FOR NO NUMBER: OUT_OF_AREA
REASON FOR NO NAME: PRIVACY
RING
The last CND message that the modem received can be displayed by using the
AT*T
command.
Setting
S48.0=1
will cause the modem to report CND information in its ASCII coded
hexadecimal raw data format. The DTE software is responsible for explaining the data.
Note:
Please refer to the Bellcore Technical Advisory document TR-NWT-000030 for the
exact data format. The above Caller ID scheme applies to the North America area. For
most Caller ID schemes, only the Caller telephone number is provided.
Different countries may employ different Caller ID schemes. Hence check the scheme
used in your country before using the Caller ID feature.
10.4 Distinctive Ring
Distinctive Ring
is a phone service that may be offered by your phone company. Check
your phone company for availability. With this service, you can have several phone
numbers assigned to the same phone line. The phone company will send a different type
of ring signal for each phone number being called. The subscriber can distinguish which
number is called by which type of ring is received.
One benefit of this feature is the ability to have three numbers on the same line allowing
you to list the three numbers for voice, data, and fax, respectively. You can then have
your fax machine answer only the ring corresponding to the fax number and have your
modem answer only the ring corresponding to the data number. A voice call will not be
answered by either fax machine or data modem and it will only be answered when
