U-90E Data/Fax Modem
Modem Installation
2-6
2.5 Modem
Configuration
There are no DIP (dual in-line package) switches or configuration settings that you need
to worry about. Your modem is factory pre-set. User configurations are also conveniently
stored in user selectable non-volatile memories and can be recalled as often as needed
by using
ATZn
command.
2.6 Power
On
Once your modem’s power switch is turned ON, a series of diagnostic tests will be
performed. For a more detailed description of these diagnostic tests, please refer to the
chapter on
Diagnostics and Troubleshooting
. After performing the diagnostic tests,
your modem is ready for use.
