![background image](http://html1.mh-extra.com/html/zyxel-communications/slc1224/slc1224_user-manual_943636056.webp)
SLC1224 User’s Guide
56
Chapter 3 G.SHDSL Port Setup
The following table describes the labels in this screen.
3.17 MAC Count Filter Setup
Use this screen to limit the number of MAC addresses that may be dynamically learned on a
DSL port.
1
Click
Port Setup
in the navigation panel and then the G.SHDSL line card’s link to open
the card’s
Port Setup
screen.
2
Click the
MAC Count Filter
link in the
SLC Port Setup
screen to open this screen.
Table 21
MAC Filter Entry Add
LABEL
DESCRIPTION
MAC Filter Entry
List
Click this link to go to the card’s
MAC Filter Entry List
screen.
MAC Filter Setup
Click this link to go to the card’s
MAC Filter Setup
screen.
Port Setup
Click this link to go to the card's
Port Setup
screen.
MAC Address
Type a MAC address in hexadecimal notation (xx:xx:xx:xx:xx:xx, where x is a
number from 0 to 9 or a letter from a to f) in this field. The MAC address cannot be
a multicast or broadcast address. Then click
Apply
.
Apply
Click
Apply
to save your changes back to the line card.
Reset
Click
Reset
to begin configuring this screen afresh.
Summary of Contents for SLC1224
