![background image](http://html1.mh-extra.com/html/zyxel-communications/slc1224/slc1224_user-manual_943636114.webp)
SLC1224 User’s Guide
114
Chapter 9 SHDSL Port Commands
9.4.24 Dot1x Disable Command
Syntax:
lcman port dot1x disable <slot-port>
where
This command turns off IEEE 802.1x on a specific port or on all ports if no port is specified.
The following example turns off IEEE 802.1x on DSL port 1 on the line card in slot 3.
Figure 62
Dot1x Disable Command Example
9.4.25 Dot1x Control Command
Syntax:
lcman port dot1x control <slot-port> <auto|auth|unauth>
where
This command sets how the line card applies IEEE 802.1x on a specified port.
The following example sets the line card to authenticate all subscribers before they can access
the network through DSL port 1 on the line card in slot 3.
<slot-port>
=
The number of the slot where the line card is located and the number
of a DSL port.
ras> lcman port dot1x Disable 3-1
<slot-port>
=
The number of the slot where the line card is located and the number
of a DSL port.
<auto|auth|una
uth>
This field sets how the line card uses IEEE 802.1x.
Use
auto
to authenticate all subscribers before they can access the
network through this port.
Use
auth
to allow all connected users to access the network through
this port without authentication.
Use
unauth
to deny all subscribers access to the network through
this port.
Summary of Contents for SLC1224
