![background image](http://html1.mh-extra.com/html/zyxel-communications/slc1224/slc1224_user-manual_943636106.webp)
SLC1224 User’s Guide
106
Chapter 9 SHDSL Port Commands
This command sets a port to accept either all Ethernet frames or just those that have a VLAN
tag.
The following example sets ADSL port 1 on the line card in slot 4 to only accept Ethernet
frames with VLAN tags.
Figure 50
Frame Type Set Command Example
9.4.11 Packet Filter Set Command
Syntax:
lcman port pktfilter set <slot-port> <pppoe-only|accept-all>
or
lcman port pktfilter set <slot-port>
<[arp]|[dhcp]|[eapol]|[pppoe]|[netbios]|[igmp]>
where
This command sets the packet type filter for a specific port.
The following example sets DSL port 1 on the line card in slot 3 to only accept PPPoE
packets.
ras> lcman port pktfilter set 3-1 pppoe-only
This next example sets DSL port 2 on the line card in slot 3 to reject ARP, PPPoE and IGMP
packets.
ras> lcman port pktfilter set 3-1 arp pppoe igmp
ras> lcman port frametype set 4-1 tag
<slot-port>
=
The number of the slot where the line card is located and the
number of a DSL port.
pppoe-only
=
Accept PPPoE packets only.
accept-all
=
Accept all packets
arp
=
Reject ARP packets.
dhcp
=
Reject DHCP packets.
eapol
=
Reject EAPol packets.
pppoe
=
Reject PPPoE packets.
netbios
=
Reject NetBIOS packets.
igmp
=
Reject IGMP packets
Summary of Contents for SLC1224
