Chapter 9 Routing
PX7511-B0 User’s Guide
144
9.5 RIP Settings
Routing Information Protocol (RIP, RFC 1058 and RFC 1389) allows a device to exchange routing
information with other routers.
Click
Network Setting > Routing > RIP
to open the
RIP
screen.
Figure 82
Network Setting > Routing > RIP
The following table describes the labels in this screen.
Table 44 Network Setting > Routing > RIP
LABEL
DESCRIPTION
#
This is the index of the interface in which the RIP setting is used.
Interface
This is the name of the interface in which the RIP setting is used.
Version
The RIP version controls the format and the broadcasting method of the RIP packets that the
Zyxel Device sends (it recognizes both formats when receiving). RIP version
1
is universally
supported but RIP version
2
carries more information. RIP version
1
is probably adequate for
most networks, unless you have an unusual network topology.
Operation
Select
Passive
to have the Zyxel Device update the routing table based on the RIP packets
received from neighbors but not advertise its route information to other routers in this interface.
Select
Active
to have the Zyxel Device advertise its route information and also listen for routing
updates from neighboring routers.
Enable
Select the check box to activate the settings.
Disable Default
Gateway
Select the check box to set the Zyxel Device to not send the route information to the default
gateway.
Cancel
Click
Cancel
to restore your previously saved settings.
Apply
Click
Apply
to save your changes back to the Zyxel Device.
Summary of Contents for PX7511-B0
