Prestige 861 VDSL Modem
VDSL Commands
5-1
Chapter 5
VDSL Commands
This chapter shows you how to configure VDSL using line interface commands.
5.1 VDSL Commands Overview
Line interface commands contain advanced configuration features that may be used for debugging and
troubleshooting. Exercise caution when using commands as incorrect usage may damage your Prestige.
See
for an overview of VDSL commands.
5.2 VDSL Default Values
The default values for the following VDSL parameters are shown in the next table.
Table 5-1 VDSL Default Values
VDSL PARAMETER
DEFAULT VALUE
VDSL Active
on
VDSL Upstream Power Backoff(UPBO) Option
on
VDSL Line Type
auto
VDSL Channel Type (Latency Mode)
slow
Upstream Max interleave delay
10ms
Downstream Max interleave delay
10ms
VDSL Band Plan
998-138-12000
VDSL Band Modifier
0x11 (The lowest DS frequency starts from 138KHz.)
VDSL G.HS Option
on
5.3 PVC Default Values
The default values for the following PVC (Permanent Virtual Circuit) parameters are shown in the next table.
