Prestige 861 VDSL Modem
Firmware Upload
8-1
Chapter 8
Firmware Upload
This chapter tells you how to upload new firmware.
8.1 Firmware Upload Overview
Find firmware at
and refer to the following sections for upgrading firmware using FTP
commands. After a successful upload, the system will reboot.
Only use firmware for your Prestige’s specific model. Refer to the label on the
bottom of your Prestige.
8.2 Checking System Firmware Version
Syntax:
version
This command displays the current system firmware version. An example is shown next.
Figure 8-1 Version Command Example
8.3 Uploading Firmware via FTP
Do not turn off the device while writing flash is in progress!!
Step 1.
Make sure you are in the same directory where you put the firmware file, and then enter “ftp
192.168.1.1” in the command prompt line as shown next.
Step 2.
Type any character in the
User (192.168.1.1: (none)):
field and press
[ENTER]
.
Step 3.
Enter “1234” or what you have set in serial or telnet management interface in the
Password
field
and press
[ENTER]
.
Step 4.
Now you are ready to upload new firmware file to the Prestige by issuing the following ftp
commands:
P861:/> version
VDSL/DMT P861 version V1.1(BV.0)B6 (October 28 2003)
P861:/>
