Prestige 861 VDSL Modem
Commands Introduction
3-5
Table 3-1 Command Summary
MAIN
COMMAND
SUB-COMMAND DESCRIPTION
passwd
This command sets the password.
ping
This command sends ICMP echo request message to the
host.
exit
This command logs out the prestige.
reboot
This command reboots the Prestige.
sysconfig
exit
This command exits the sysconfig shell.
help
This command shows the help available.
getmac
This command shows the MAC address of the Prestige.
getip
This command shows the IP address of the Prestige.
setip
This command sets the IP address of the Prestige.
getmask
This command shows the IP subnet mask.
setmask
This command sets the IP subnet mask.
vdsl
exit
This command exits the vdsl shell.
help
This command shows the help message.
port
counter
This command shows port statistics and current performance
counters from Prestige.
snr
This command shows the port SNR (Signal-to-Noise-Ratio)
and attenuation statistics.
speed
This command shows the port speed. The transmission
power is also displayed.
help
This command shows the help message.
profile
actv
This command activates the current profile.
reset
This command resets the current profile to factory default.
