Prestige 861 VDSL Modem
VDSL Commands
5-9
Figure 5-4 PVC List Command Example
The following table explains these parameters.
Table 5-6 PVC List
PARAMETER DESCRIPTION
pvc
This is the PVC channel.
act
This shows whether this PVC channel is active or not.
mode
This shows the encapsulation mode.
vpi/vci
This is the Virtual Path Identifier and Virtual Channel Identifier.
qos
This is the ATM QoS type.
pcr
This is the maximum rate at which the sender can send cells.
cdvt
This is the acceptable range of the Cell Delay Variation.
scr
This is the mean cell rate of each bursty traffic source.
mbs
This is the maximum number of cells that can be sent at the PCR.
5.9.3 Reset PVC Channel
Syntax:
pvc reset [0/all]
This command load and save the default PVC.
5.9.4 Activate/Deactivate PVC Channel
Syntax:
pvc set <n> [enable/disable]
This command enables/disables the PVC channel you specify. An example is shown next.
P861:/> vdsl
vdsl> pvc list
=========================== PVC ==============================
pvc act mode vpi/vci qos pcr cdvt scr mbs
--------------------------------------------------------------
0 Y llcbridged 0/33 ubr 262144 1 0 0
==============================================================
vdsl>
