Prestige 861 VDSL Modem
3-2
Commands Introduction
3.1.2 Command Notation
The following notations denote user options:
[a/b/c/d...]
or
<a/b/c/d…>
:
Select and type the predefined default options.
[DEFAULT]
or
<DEFAULT>:
Enter the value or predefined selection for this sub-command.
a.b.c.d
:
The option is a 4-byte dotted decimal value.
3.2 Connect to your Prestige Using Telnet
The following procedure details how to telnet into your Prestige.
Step 1.
Make sure your computer IP address and the Prestige IP address are on the same subnet. Refer to
the
Setting Up Your Computer IP Address
appendix.
Step 2.
In Windows, click
Start
(usually in the bottom left corner),
Run
and then type “telnet
192.168.1.1” (the default IP address) and click
OK
.
Step 3.
For your first login, enter “admin” in the
login
field and “1234” in the
Password
field.
Step 4.
After entering the correct password you can use the commands to do configuration.
3.3 Connect to Your Prestige Using the Console Port
Connect to the Prestige console port using a terminal emulation software. A computer with terminal
emulation software configured to the following parameters:
VT100 terminal emulation
9600 bps
No parity, 8 data bits, 1 stop bit
No flow control
3.3.1 Initial Screen
When you turn on your Prestige, it performs several internal tests as well as line initialization. After the
initialization, the Prestige asks you to press
[ENTER]
to continue, as shown.
