GD-W913N/ND
1
1 Cable Connection
Please follow the steps below to connect the device
Step 1
Connect the
ADSL
port of the router to the Modem port of the splitter
using a telephone cable. Connect the phone to the phone port of the splitter
using a telephone cable. Connect the incoming line to the Line port of the
splitter.
Step 2
The spliiter has three ports:
LINE
: Connect to a wall phone jack (RJ-11 jack)
Modem
: Connect to the ADSL interface of the router
PHONE
: Connect to a telephone set
Step 3
Connect the
LAN
port of the router to the network card of the PC through
an Ethernet cable.
Step 4
Plug one end of the power adapter into the wall outlet and the other end
to the
Power
port of the router.
The followig figure show the connection of the DSL router, PC and telephones.
Figure 1 Connecting the DSL router