ZyXEL Communications PRESTIGE 650H -, User Manual

Page: 30 / 368

Prestige 650 Series User’s Guide
1-4 Getting To Know Your Prestige
Dynamic DNS Support
With Dynamic DNS support, you can have a static hostname alias for a dynamic IP address, allowing the
host to be more easily accessible from various locations on the Internet. You must register for this service
with a Dynamic DNS client.
Multiple PVC (Permanent Virtual Circuits) Support
Your Prestige supports up to 8 PVC’s.
ADSL Standards
♦
Full-Rate (ANSI T1.413, Issue 2; G.dmt (G.992.1) with line rate support of up to 8 Mbps
downstream and 832 Kbps upstream.
♦
G.lite (G.992.2) with line rate support of up to 1.5Mbps downstream and 512Kbps upstream.
♦
Supports Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.994.1 and G.996.1 (for
ISDN only); G.991.1;G.lite (G992.2)).
♦
Supports OAM F4/F5 loop-back, AIS and RDI OAM cells.
♦
ATM Forum UNI 3.1/4.0 PVC.
♦
Supports up to 8 PVCs (UBR, CBR, VBR).
♦
Multiple Protocols over AAL5 (RFC 1483).
♦
PPP over AAL5 (RFC 2364).
♦
PPP over Ethernet (RFC 2516).
DHCP Support
DHCP (Dynamic Host Configuration Protocol) allows individual clients (computers) to obtain TCP/IP
configuration at start-up from a centralized DHCP server. The Prestige has built-in DHCP server capability
enabled by default. It can assign IP addresses, an IP default gateway and DNS servers to DHCP clients. The
Prestige can now also act as a surrogate DHCP server (DHCP Relay) where it relays IP address assignment
from the actual real DHCP server to the clients.
IP Alias
IP Alias allows you to partition a physical network into logical networks over the same Ethernet interface.
The Prestige supports three logical LAN interfaces via its single physical Ethernet interface with the Prestige
itself as the gateway for each LAN network.