ZyXEL Communications PRESTIGE 650H -, User Manual

Page: 203 / 368

Prestige 650 Series User’s Guide
Remote Node Configuration 19-15
To configure the parameters for traffic redirect, enter 11 from the main menu to display Menu 11.1–
Remote Node Profile as shown next.
Figure 19-14 Menu 11.1 – Remote Node Profile
To configure traffic redirect properties, press [SPACE BAR] to select Yes in the Edit Traffic Redirect
field and then press
[ENTER].
Table 19-3 Menu 11.1 – Remote Node Profile (Traffic Redirect Field)
FIELD DESCRIPTION EXAMPLE
Edit Traffic
Redirect
Press [SPACE BAR] to select Yes and press [ENTER] to configure
Menu 11.7 – Traffic Redirect Setup .
Yes
Press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press
[ESC] at any time to cancel.
19.7.1 Traffic Redirect Setup
Configure parameters that determine when the Prestige will forward WAN traffic to the backup gateway
using
Menu 11.7 — Traffic Redirect Setup .
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP Route= IP
Active= Yes Bridge= No
Encapsulation= ENET ENCAP Edit IP/Bridge= No
Multiplexing= LLC-based Edit ATM Options= No
Service Name= N/A
Incoming: Telco Option:
Rem Login= N/A Allocated Budget(min)= N/A
Rem Password= N/A Period(hr)= N/A
Outgoing: Schedule Sets= N/A
My Login= N/A Nailed-Up Connection= N/A
My Password= N/A Session Options:
Authen= N/A Edit Filter Sets= No
Idle Timeout(sec)= N/A
Edit Traffic Redirect= Yes
Press ENTER to Confirm or ESC to Cancel: