ZyXEL Communications PRESTIGE 650H -, User Manual

Page: 241 / 368

Prestige 650 Series User’s Guide
Filter Configuration 23-9
Table 23-2 Rule Abbreviations Used
FILTER TYPE DESCRIPTION
Off Offset
Len Length
23.4 Configuring a Filter Rule
To configure a filter rule, type its number in Menu 21.x – Filter Rules Summary and press [ENTER] to
open menu 21.x.1 for the rule.
There are two types of filter rules: TCP/IP and Generic . Depending on the type of rule, the parameters for
each type will be different. Use [SPACE BAR] to select the type of rule that you want to create in the
Filter Type field and press [ENTER] to open the respective menu.
To speed up filtering, all rules in a filter set must be of the same class, for instance, protocol filters or
generic filters. The class of a filter set is determined by the first rule that you create. When applying the
filter sets to a port, separate menu fields are provided for protocol and device filter sets. If you include a
protocol filter set in a device filters field or vice versa, the Prestige will warn you and will not allow you to
save.
23.4.1 TCP/IP Filter Rule
This section shows you how to configure a TCP/IP filter rule. TCP/IP rules allow you to base the rule on
the fields in the IP and the upper layer protocol, for example, UDP and TCP headers.
To configure TCP/IP rules, select TCP/IP Filter Rule from the Filter Type field and press [ENTER] to
open Menu 21.x.1 – TCP/IP Filter Rule , as shown next.