ZyXEL Communications Prestige 650H-17, User Manual, Page: 70 / 200

Prestige 650H-17 ADSL Router
4-4 Remote Node Configuration
Table 4-1 Remote Node Profile Menu Fields
FIELD DESCRIPTION EXAMPLE
Encapsulation PPPoA refers to RFC-2364 (PPP Encapsulation over
ATM Adaptation Layer 5).
If RFC-1483 (Multiprotocol Encapsulation over ATM
Adaptation Layer 5) of
ENET ENCAP are selected,
then the Rem Login , Rem Password , My Login , My
Password , Edit PPP Options and Authen fields are not
applicable ( N/A ).
PPPoA
Multiplexing Press [SPACE BAR] and then [ENTER] to select the
method of multiplexing that your ISP uses, either
VC-
based or LLC-based .
LLC-based
Service Name When using PPPoE encapsulation, type the name of
your PPPoE service here.
N/A
Incoming:
Rem Login
Type the login name that this remote node will use to
call your Prestige. The login name and the
Rem
Password will be used to authenticate this node.
Rem Password Type the password used when this remote node calls
your Prestige.
Outgoing:
My Login
Type the login name assigned by your ISP when the
Prestige calls this remote node.
My Password Type the password assigned by your ISP when the
Prestige calls this remote node.
This field sets the authentication protocol used for
outgoing calls. Options for this field are:
CHAP / PAP – Your Prestige will accept either CHAP or
PAP when requested by this remote node.
CHAP – accept CHAP (Challenge Handshake
Authentication Protocol) only.
Authen
PAP – accept PAP (Password Authentication Protocol)
only.
PAP
Route This field determines the protocol used in routing.
Options are
IP and None.
IP