ZyXEL Communications Prestige 650H-17, User Manual, Page: 37 / 200

Prestige 650H-17 ADSL Router
Hardware Installation and Initial Setup 2-7
2.7.2 Connect to your Prestige Using the Web Configurator
Step 1. Launch your web browser.
Step 2. Enter 192.168.1.1 as the URL.
Step 3. In the User Name field, type "admin". In the Password field, type "1234". Click OK .
Click the Help button for online web configurator HTML help.
The remainder of this user’s guide shows you how to configure the Prestige for Internet access using SMT
screens. There are also some sections in this guide that also focus on using Telnet to configure the Prestige.
2.7.3 Entering Password
The login screen appears after you press [ENTER] , prompting you to enter the password, as shown next.
For your first login, enter the default password “1234”. As you type the password, the screen displays an
“*” for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your Prestige will
automatically log you out and will display a blank screen. If you see a blank screen, press
[ENTER] to
display the login screen again.
Figure 2-5 Login Screen
2.8 Resetting the Prestige
If you forget your password or cannot access the Prestige, you will need to reload the factory-default
configuration file. Uploading this configuration file replaces the current configuration file with the factory-
default configuration file. This means that you will lose all configurations that you had previously; the
password will be reset to “1234” and the LAN IP address to 192.168.1.1.
To obtain the default configuration file, download it from the ZyXEL FTP site, unzip it and save it in a
folder.
2.8.1 Methods of Restoring Factory-Defaults
You can erase the current configuration and restore factory defaults in three ways:
Password : ****