ZyXEL Communications Prestige 650H-17, User Manual, Page: 122 / 200

Prestige 650H-17 ADSL Router
8-8 Filter Configuration
To configure TCP/IP rules, select TCP/IP Filter Rule from the Filter Type field and press
[ENTER]
to
open Menu 21.1.1 – TCP/IP Filter Rule , as shown next.
Figure 8-8 Menu 21.1.1 – TCP/IP Filter Rule
The following table describes how to configure your TCP/IP filter rule.
Table 8-3 TCP/IP Filter Rule Menu Fields
FIELD DESCRIPTION EXAMPLE
Filter # This is the filter set, filter rule coordinates, for instance, 2,
3 refers to the second filter set and the third filter rule of
that set. 1,1
Filter Type Use [SPACE BAR] and then [ENTER] to choose a rule.
Parameters displayed for each type will be different.
Choices are
TCP/IP Filter Rule or Generic Filter Rule .
TCP/IP Filter Rule
Active Select Yes to activate or No to deactivate the filter rule. No
(default)
IP Protocol This is the upper layer protocol, for example, TCP is 6,
UDP is 17 and ICMP is 1. The value must be between 0
and 255. A value of O matches ANY protocol. 0 to 255
Menu 21.1.1 - TCP/IP Filter Rule
Filter #: 1,1
Filter Type= TCP/IP Filter Rule
Active= No
IP Protocol= 0 IP Source Route= No
Destination: IP Addr=
IP Mask=
Port #=
Port # Comp= None
Source: IP Addr=
IP Mask=
Port #=
Port # Comp= None
TCP Estab= N/A
More= No Log= None
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule
Press ENTER to Confirm or ESC to Cancel: