ZyXEL Communications Prestige 202H Series, User Manual

Page: 97 / 309

Prestige 202H User’s Guide
Dial-in Setup 10-5
but not the remote nodes. You can specify up to 4 filter sets separated by comma, e.g., 1, 5, 9, 12, in each
filter field. The default is no filters.
Spaces are accepted in this field. For more information on defining the filters, see the filters chapter.
Figure 10-2 Menu 13.1 Default Dial-in Filter
10.4 Callback Overview
Callback serves two purposes. One is security. When set to callback to a fixed number, an intruder will not
gain access to your network even if he/she stole the password from your user, because the Prestige always
calls back to the pre-configured number.
The other is ease of accounting. For instance, your company pays for the connection charges for
telecommuting employees and you use your Prestige as the dial-in server. When you turn on the callback
option for the dial-in users, all usage is charged to the company instead of the employees, and your
accounting department can avoid the hassles of accountability and reimbursement.
10.5 Dial-In User Setup
This section provides steps on how to set up a remote dial-in user.
Step 1.
From the Main Menu, enter 14 to go to Menu 14 – Dial-in User Setup , as shown in the next
figure.
Menu 13.1 - Default Dial-in Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Enter here to CONFIRM or ESC to CANCEL: