ZyXEL Communications Prestige 202H Series, User Manual

Page: 85 / 309

Prestige 202H User’s Guide
Remote Node Configuration 8-13
Table 8-6 Remote Node Network Layer Options
FIELD DESCRIPTION EXAMPLE
Metric Metric represents the “cost” of transmission for routing
purposes. IP routing uses hop count as the measurement of
cost, with a minimum of 1 for directly connected networks.
Enter a number that approximates the cost for this link. The
number need not be precise, but it must be between 1 and 15.
In practice, 2 or 3 is usually a good number. 2
Private This parameter determines if the Prestige will include the route
to this remote node in its RIP broadcasts. If set to
Yes , this
route is kept private and not included in RIP broadcast. If No ,
the route to this remote node will be propagated to other hosts
through RIP broadcasts.
No
RIP Direction Press [SPACE BAR] and then [ENTER] to select from Both / In
Only / Out Only/None .
None (default)
Version Press [SPACE BAR] and then [ENTER] to select the RIP
version from RIP-1/RIP-2B/RIP-2M.
RIP-2B (default)
Once you have completed filling in Menu 11.3 Remote Node Network Layer Options , press [ENTER] at
the message “Press ENTER to Confirm...” to save your configuration and return to menu 11, or press
[ESC] at any time to cancel.
The following diagram shows the sample IP addresses to help you understand the field of My Wan Addr in
Menu 11.3.