ZyXEL Communications Prestige 128L, User Manual

Page: 55 / 114

Remote Node Configuration 43
and your Prestige. You can choose from 12 different filter sets. In
addition, you can link up to 4 filter sets together for further
customization (e.g., 1, 5, 9, 12). Note that spaces and , are
accepted in this field.
For more information on customizing your filter sets, see Chapter 9.
The default is blank, i.e., no filters defined.
14. Session Option: Idle Timeout (sec) - This value specifies the
number of idle seconds that elapses before sending a ppp-echo
packet to verify whether the line is up.
Once you have completed filling in Menu 11.1 - Remote Node Profile,
press
ENTER at the message: Press ENTER to Confirm ... to confirm
your selections, or press ESC at any time to cancel your selections.
Editing PPP Options
Figure 5-3 Remote Node PPP Options
1. Encapsulation - Select CCP (Compression Control Protocol) for
the PPP or MP link. There are two options in this field.
•
Standard PPP - Standard PPP options will be used.
•
CISCO PPP - Cisco PPP options will be used.