ZyXEL Communications Prestige 128L, User Manual

Page: 67 / 114

Novell IPX Configuration 55
IPX Ethernet Setup
The first step is to set up your Prestige on the LAN. From menu 3,
select option 3 to go to Menu 3.3 - Novell IPX Ethernet Setup as
seen below:
Figure 7-2 Menu 3.3 - Novell IPX Ethernet Setup
1. Seed Router - Determine if your Prestige is to act as a seed
router. This value depends on the existing network. If there is a
NetWare server providing the network number, select No. If there
is no NetWare server providing the network number, select Yes.
2. Frame Type - For every frame type that your Prestige needs to
support, you need to set the corresponding field to Yes. The frame
type(s) selected here must be the same frame type(s) as the server
or client stations on that network. Otherwise, the devices will not be
able to communicate. You can select one or more of these four
frame types:
•
802.2
•
802.3
•
Ethernet II