ZyXEL Communications Prestige 128L, User Manual

Page: 72 / 114

60 Novell IPX Configuration
Figure 7-6 Menu 12.2 - Edit IPX Static Route
1. Server Name - In this field, enter in the name that has been
configured for the server. This name must be the exact name
configured in the NetWare server.
2. Network # - This field contains the internal network number of the
remote server which you wish to access. Do not use 00000000 or
FFFFFFFF for this field.
3. Node # - This field contains the address of the node on which the
server resides. If you are using a Novell IPX implementation, this
value is 000000000001.
4. Socket # - This field contains the socket number on which the
server will receive service requests. The default for this field is hex
0451.
5. Type # - This field identifies the type of service the server provides.
The default for this field is hex 0004.
6. Gateway Node - In this field, enter the number (1-4) of the
Remote Node that is linked to this static route. That is, the Remote
Node that you wish to route the packet to.