ZyXEL Communications P-660RU-T1 v3, User Manual, Page: 84 / 230

Chapter 9 Static Route
P-660RU-Tx v3 User’s Guide
84
9.2 The Routing Table List Screen
Use this screen to view the static route rules. Click Advanced Setup > Routing to display the
following screen.
Figure 32 Advanced Setup > Routing Table List
The following table describes the labels in this screen.
9.2.1 The Static Route Screen
Use this screen to configure the required information for a static route. Select a static route
index number and click
Edit , or click the ADD ROUTE button in the Routing Table List
screen. The screen shown next appears.
Figure 33 Advanced > Routing > Static Route
Table 19 Advanced Setup > Routing Table List
LABEL DESCRIPTION
# This is the number of an individual static route.
Dest IP This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
Mask This parameter specifies the IP network subnet mask of the final destination.
Gateway IP This is the IP address of the gateway. The gateway is a router or switch on the same
network segment as the device's LAN or WAN port. The gateway helps forward
packets to their destinations.
Metric This field displays the priority of each route on the ZyXEL Device.
Device This is the name that describes or identifies this route.
Use This is the number of times the route was used.
Edit Click this to go to the screen where you can set up a static route on the ZyXEL
Device. You cannot edit the default routes.
Drop Click this to remove a static route from the ZyXEL Device. You cannot delete the
default routes.
ADD ROUTE Click this to add a new static route on the ZyXEL Device.