ZyXEL Communications P-660N-T1A, User Manual

Page: 207 / 322

Chapter 20 Logs
P-660N-T1A User’s Guide
207
20.3 Log Descriptions
This section provides descriptions of example log messages.
Table 73 System Maintenance Logs
LOG MESSAGE DESCRIPTION
Time calibration is
successful
The router has adjusted its time based on information
from the time server.
Time calibration failed
The router failed to get information from the time
server.
WAN interface gets IP: %s
A WAN interface got a new IP address from the DHCP,
PPPoE, or dial-up server.
DHCP client IP expired
A DHCP client's IP address has expired.
DHCP server assigns %s
The DHCP server assigned an IP address to a client.
Successful WEB login
Someone has logged on to the router's web
configurator interface.
WEB login failed
Someone has failed to log on to the router's web
configurator interface.
Successful TELNET login
Someone has logged on to the router via telnet.
TELNET login failed
Someone has failed to log on to the router via telnet.
Successful FTP login
Someone has logged on to the router via ftp.
FTP login failed
Someone has failed to log on to the router via ftp.
NAT Session Table is Full!
The maximum number of NAT session table entries
has been exceeded and the table is full.
Starting Connectivity
Monitor
Starting Connectivity Monitor.
Time initialized by Daytime
Server
The router got the time and date from the Daytime
server.
Time initialized by Time
server
The router got the time and date from the time
server.
Time initialized by NTP
server
The router got the time and date from the NTP server.
Connect to Daytime server
fail
The router was not able to connect to the Daytime
server.
Connect to Time server fail
The router was not able to connect to the Time server.
Connect to NTP server fail
The router was not able to connect to the NTP server.
Too large ICMP packet has
been dropped
The router dropped an ICMP packet that was too
large.
Configuration Change: PC =
0x%x, Task ID = 0x%x
The router is saving configuration changes.
Successful SSH login
Someone has logged on to the router’s SSH server.
SSH login failed
Someone has failed to log on to the router’s SSH
server.