ZyXEL Communications ONU-2024 Series, User Manual

Page: 60 / 268

Chapter 6 System Status and Port Statistics
ONU User’s Guide
60
Link This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M
for 1000Mbps) and the duplex ( F for full duplex or H for half). It also shows the cable
type ( Copper or Fiber ) for the combo ports.
State If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the
port (see
Section on page 97 for more information).
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it
displays STOP .
This field displays N/A for the GEPON uplink port.
LACP This fields displays whether LACP (Link Aggregation Control Protocol) has been
enabled on the port.
This field displays
N/A for the GEPON uplink port.
TxPkts This field shows the number of transmitted frames on this port.
RxPkts This field shows the number of received frames on this port.
Errors This field shows the number of received errors on this port.
Tx KB/s This field shows the number of kilobytes per second transmitted on this port.
Rx KB/s This field shows the number of kilobytes per second received on this port.
Up Time This field shows the total amount of time in hours, minutes and seconds the port has
been up.
Clear Counter Enter a port number and then click Clear Counter to erase the recorded statistical
information for that port, or select Any to clear statistics for all ports.
Table 6 Status (continued)
LABEL DESCRIPTION