ZyXEL Communications ONU-2024 Series, User Manual

Page: 142 / 268

Chapter 19 Multicast
ONU User’s Guide
142
Figure 69 Advanced Application > Multicast > Multicast Setting > MVR: Group Configuration
The following table describes the labels in this screen.
Table 45 Advanced Application > Multicast > Multicast Setting > MVR: Group Configuration
LABEL DESCRIPTION
Multicast
VLAN ID Select a multicast VLAN ID (that you configured in the MVR screen) from the drop-
down list box.
Name Enter a descriptive name for identification purposes.
Start Address Enter the starting IP multicast address of the multicast group in dotted decimal
notation.
Refer to
Section on page 131 for more information on IP multicast addresses.
End Address Enter the ending IP multicast address of the multicast group in dotted decimal
notation.
Enter the same IP address as the
Start Address field if you want to configure only one
IP address for a multicast group.
Refer to
Section on page 131 for more information on IP multicast addresses.
Add Click Add to save your changes to the ONU’s run-time memory. The ONU loses these
changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring this screen afresh.
MVLAN This field displays the multicast VLAN ID.
Name This field displays the descriptive name for this setting.
Start Address This field displays the starting IP address of the multicast group.
End Address This field displays the ending IP address of the multicast group.
Delete Select Delete Group and click Delete to remove the selected entry(ies) from the table.
Cancel Select Cancel to clear the checkbox(es) in the table.