ZyXEL Communications ONU-2024 Series, User Manual

Page: 52 / 268

Chapter 4 The Web Configurator
ONU User’s Guide
52
4.3.1 Change Your Password
After you log in for the first time, it is recommended you change the default administrator
password. Click
Management > Access Control > Logins to display the next screen.
Figure 17 Change Administrator Login Password
Static Route This link takes you to screens where you can configure static routes. A static route
defines how the ONU should forward traffic by configuring the TCP/IP parameters
manually.
DiffServ This link takes you to screens where you can enable DiffServ and set DSCP-to-
IEEE802.1p mappings.
DHCP This link takes you to a screen where you can configure the DHCP settings.
Management
Maintenance This link takes you to screens where you can perform firmware and configuration
file maintenance as well as reboot the system.
Access Control This link takes you to screens where you can change the system login password
and configure SNMP and remote management.
Diagnostic This link takes you to screens where you can view system logs and test port(s).
Syslog This link takes you to screens where you can setup system logs and a system log
server.
Cluster
Management This link takes you to a screen where you can configure clustering management
and view its status.
MAC Table This link takes you to a screen where you can view the MAC addresses (and types)
of devices attached to what ports and VLAN IDs.
ARP Table This link takes you to a screen where you can view the MAC addresses – IP
address resolution table.
Configure Clone This link takes you to a screen where you can copy attributes of one port to other
ports.
Table 5 Navigation Panel Links (continued)
LINK DESCRIPTION