ZyXEL Communications omni.net D, Technical Reference

Page: 172 / 186

Technical Reference for ZyXEL omni.net series
B-20
All the Following Commands Require a 'AT' Prefix
S Com. bit dec hex Function and description +Def./Ref.
7 Reserved.
S123= bit dec hex
0 0-3 0-3 Select Caller ID signaling method.
0 (*) 0 Country default.
1 1 DTMF, prior to ring.
2 2 ETS FSK, during ring.
3 3 ETSI FSK, prior to ring.
2-7 Reserved
S124= dec hex Empty IP packet interval for PPP +000
0-25
5 0-FF in units of 1s.
S125= bit dec hex
1-6 0 (*) Sub-persist time interval. KSx n
7 0 0 (*) S125b1-6 is in Second unit.
KSS n
128 80 S125b1-6 is in Minute unit. KSM n
S126= bit dec hex
0-25
5 0-FF Add-threshold for BOD in Kbps unit
JA n ,+48
S127= bit dec hex
0-25
5 0-FF Sub-threshold for BOD in Kbps unit JS n ,+32
Notes:
#
In 'Reference' column, 'AT' is omitted when AT command is referred to.
#
+ nnn is manufacturer default when listed in 'Reference' column.
#
bit = S-register bit number, 'b', used in 'ATSr.b= n ', 'ATSr.b=?'
#
dec = Decimal value, 'x', used in 'ATSn= x '
#
hex = Hex value, used in omni.net LCD model for setting 'STATUS REGISTER' manually from front
panel.
Table 74. Extended S-Registers "ATSn=x"