ZyXEL Communications omni.net D, Technical Reference

Page: 144 / 186

Technical Reference for ZyXEL omni.net series
A-10
All the Following Commands Require a 'AT' Prefix
AT Com. Options Function & Description Reference
UNIT=xxx (0.001
*
65) save the charging fee per unit to NVRAM.
UNIT? View the value of charging fee per unit.
UPX Upload firmware to the Flash EPROM.
V n Verbal/Numeric result codes. S23b6
V0 Display result code in numeric form. (See also S35b7 and the result
code table of 'ATXn').
V1 (*) Display result code in verbose form.
X n
n=0-8 (5 *) Result code options, see the Options Table. S23b3-5
Z n n=0-4 Reset omni.net and set power-on profile. S15b5-7
Zn Reset omni.net and load user profile (n=0-3).
Z4 Reset omni.net and load factory settings.
$ Basic command summary help.
Table 68. Basic 'AT' Command Set
Description of ATI3 Output
The Link Status Report output appears as follows:
ZyXEL ISDN TA LINK STATUS REPORT
Connect DTE Speed :
Error Control Level :
Protocol Link Speed :
Octets Received : 0
Octets Sent : 0
Cause :
Cause Value : 0
HDLC FCS Error : 0
HDLC Receive Over-run : 0