ZyXEL Communications omni.net D, Technical Reference

Page: 74 / 186

Technical Reference for ZyXEL omni.net series
6-4
NOTE:
1: If you disable the call waiting function (S79.2=0 or S79.3=0),
the second incoming call will be blocked.
2: If you configure the POTS port for Modem/Fax connection
(S79.4=1 or S79.5=1), the call waiting feature of the respective POTS
port will be always disabled.
There are several ways to deal with a second incoming call.
1. Accept the call
Press the Flash key and 0 to accept the second call and put the current call on hold.
2. Reject the call
Press the
Flash
key and
5
to reject the second incoming call.
3. Establish a 3-Way Conference
Press the
Flash
key and
3
to establish the three-way conference.
Call Broker
The call broker function enables you to switch back and forth between the first and second calls by
pressing the
Flash
key and
0
.
When you accept a second call, you can use the call broker function to switch back and forth
between caller B and C.
Step 1.
Switch to caller C
Press the
Flash
key and
0
to switch to second caller C.
Step 2. Return to caller B
Press the Flash key and 0 again to switch back to caller B.