Chapter 8 AP Profile
NWA1123-ACv2 User’s Guide
87
Figure 52
SSID > MAC Filter List > Add/Edit MAC Filter Profile
The following table describes the labels in this screen.
8.6 Layer-2 Isolation List
Layer-2 isolation is used to prevent wireless clients associated with your NWA from communicating
with other wireless clients, APs, computers or routers in a network.
Table 41
SSID > MAC Filter List > Add/Edit MAC Filter Profile
LABEL
DESCRIPTION
Profile Name
Enter up to 31 alphanumeric characters for the profile name. This name is only visible in
the Web Configurator and is only for management purposes. Spaces and underscores are
allowed.
Filter Action
Select
allow
to permit the wireless client with the MAC addresses in this profile to connect
to the network through the associated SSID; select
deny
to block the wireless clients with
the specified MAC addresses.
Add
Click this to add a MAC address to the profile’s list.
Edit
Click this to edit the selected MAC address in the profile’s list.
Remove
Click this to remove the selected MAC address from the profile’s list.
#
This field is a sequential value, and it is not associated with a specific user.
MAC
This field specifies a MAC address associated with this profile. You can click the MAC
address to make it editable.
Description
This field displays a description for the MAC address associated with this profile. You can
click the description to make it editable. Enter up to 60 characters, spaces and underscores
allowed.
OK
Click
OK
to
save your changes back to the NWA.
Cancel
Click
Cancel
to exit this screen without saving your changes.
Summary of Contents for NWA1123-ACv2
Page 10: ...10 PART I User s Guide...
Page 29: ...29 PART II Technical Reference...
Page 55: ...Chapter 6 Wireless NWA1123 ACv2 User s Guide 55 Figure 31 Configuration Wireless AP Management...
Page 210: ...Appendix D Legal Information NWA1123 ACv2 User s Guide 210 Environmental Product Declaration...
