ZyXEL Communications NWA1123-ACv2, User Manual

Page: 50 / 218

Chapter 5 Network
NWA1123-ACv2 User’s Guide
50
Figure 27
Configuration > Network > IP Setting (Retake screenshot)
Each field is described in the following table.
Table 22
Configuration > Network > IP Setting
LABEL DESCRIPTION
IP Address
Assignment
Get
Automatically
Select this to make the interface a DHCP client and automatically get the IP address,
subnet mask, and gateway address from a DHCP server.
Use Fixed IP
Address
Select this if you want to specify the IP address, subnet mask, and gateway manually.
IP Address Enter the IP address for this interface.
Subnet Mask Enter the subnet mask of this interface in dot decimal notation. The subnet mask
indicates what part of the IP address is the same for all computers in the network.
Gateway Enter the IP address of the gateway. The NWA sends packets to the gateway when it
does not know how to route the packet to its destination. The gateway should be on the
same network as the interface.
DNS Server IP
Address
Enter the IP address of the DNS server.
IPv6 Address
Assignment
Enable Stateless
Address Auto-
configuration
(SLAAC)
Select this to enable IPv6 stateless auto-configuration on the NWA. The NWA will
generate an IPv6 address itself from a prefix obtained from an IPv6 router in the
network.
Link-Local
Address
This displays the IPv6 link-local address and the network prefix that the NWA generates
itself for the LAN interface.