Chapter 13 Log and Report
NWA1123-ACv2 User’s Guide
145
SSL/TLS
Encryption
Select
SSL/TLS
to use Secure Sockets Layer (SSL) or Transport Layer Security
(TLS) if you want encrypted communications between the mail server and the NWA.
Select
STARTTLS
to upgrade a plain text connection to a secure connection using
SSL/TLS.
Select
No
to not encrypt the communications.
Mail Server Port
Enter the same port number here as is on the mail server for mail traffic.
Mail Subject
Type the subject line for the outgoing e-mail.
Send From
Type the e-mail address from which the outgoing e-mail is delivered. This address is
used in replies.
Send Log To
Type the e-mail address to which the outgoing e-mail is delivered.
Send Alerts To
Type the e-mail address to which alerts are delivered.
Sending Log
Select how often log information is e-mailed. Choices are:
When Full
,
Hourly and
When Full
,
Daily and When Full
, and
Weekly and When Full
.
Day for Sending
Log
This field is available if the log is e-mailed weekly. Select the day of the week the log
is e-mailed.
Time for Sending
Log
This field is available if the log is e-mailed weekly or daily. Select the time of day
(hours and minutes) when the log is e-mailed. Use 24-hour notation.
SMTP
Authentication
Select this check box if it is necessary to provide a user name and password to the
SMTP server.
User Name
This box is effective when you select the
SMTP Authentication
check box. Type the
user name to provide to the SMTP server when the log is e-mailed.
Password
This box is effective when you select the
SMTP Authentication
check box. Type the
password to provide to the SMTP server when the log is e-mailed.
Active Log and Alert
System log
Use the
System Log
drop-down list to change the log settings for all of the log
categories.
disable all logs
(red X) - do not log any information for any category for the system
log or e-mail any logs to e-mail server 1 or 2.
enable normal logs
(green check mark) - create log messages and alerts for all
categories for the system log. If e-mail server 1 or 2 also has normal logs enabled,
the NWA will e-mail logs to them.
enable normal logs and debug logs
(yellow check mark) - create log messages,
alerts, and debugging information for all categories. The NWA does not e-mail
debugging information, even if this setting is selected.
E-mail Server 1
Use the
E-Mail Server 1
drop-down list to change the settings for e-mailing logs to
e-mail server 1 for all log categories.
Using the
System Log
drop-down list to disable all logs overrides your e-mail server
1 settings.
enable normal logs
(green check mark) - e-mail log messages for all categories to
e-mail server 1.
enable alert logs
(red exclamation point) - e-mail alerts for all categories to e-mail
server 1.
Table 67
Configuration > Log & Report > Log Setting > Edit System Log Setting (continued)
LABEL
DESCRIPTION
Summary of Contents for NWA1123-ACv2
Page 10: ...10 PART I User s Guide...
Page 29: ...29 PART II Technical Reference...
Page 55: ...Chapter 6 Wireless NWA1123 ACv2 User s Guide 55 Figure 31 Configuration Wireless AP Management...
Page 210: ...Appendix D Legal Information NWA1123 ACv2 User s Guide 210 Environmental Product Declaration...
